Cam Name: 510G Intake: Open: 20° Close: 38° Duration: 238° Centerline: 99° TDC Lift: .0187” Exhaust: Open: 52° Close: 20° Duration: 252° Centerline: 106° TDC Lift: 0.179”
Lift: 0.510” Works with stock valve springs. Works with stock pushrods
Included Items: (1) Rear camshaft (1) Front camshaft (1) Cam drive outer gear (1) Pinion gear (4) Pushrods (4) Pushrod covers (4) Pushrod cover keepers (1) Cam cover gasket (2) Outer cam ball bearings (2) Inner cam needle bearings (2) Lifter cover gaskets (12) O-rings(assorted sizes) (1) Retaining ring (1) 5/16"-18 x 3/4" Flange hex head bolt (1) Steel bearing retention plate (4) Small screws (1) 1/4"-20 x 3/8" Button head bolt (4) Tappets (1) Blue aluminum cam support plate (1) Blue aluminum oil pump assembly (2) Hydraulic tensioner oil block off plates (4) 1/4"-20 x 3/4" Button head bolts (3) O-rings(assorted sizes) (2) Engine assembly lube (3) #243 Loctite threadlocker (2) #262 Loctite threadlocker (4) 1/4"-20 x 2" Socket head bolts (4) 1/4" Flat washers Instructions The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. |
Mfg #: | 310-0811 |
---|---|
Part #: | 1400664 |
Type | Camshaft |
Units | Kit |
Weight | 12.85 lbs |