Freedom HD00228 Chrome Sharp Curve Radius Exhaust FL FLT 95-16

• 2-2 chopper style exhaust with a radius bend
• 2 1/2 in. O.D. 1-piece blue-proof 220 degree coverage heat shield
• Triple step header
• Stainless steel hardware and brackets
• Welded in baffles
• FL models include 12mm and 18mm O2 sensor plugs
• 1-year manufacturers warranty
• 100% American made

FITMENT NOTE:
Due to this design, some accessories may interfere with this exhaust system. Such as saddle bags or passenger footpegs. in order to fit properly in some models they may have to be relocated.

Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove bluing.

Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during or after installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section

(1) Chrome steel front head pipe W/heat shield, baffle and end cap

(1) Chrome steel rear head pipe W/heat shield baffle and end cap

(1) Black steel relocator bracket

(2) Barrell clamp #60

(3) #24 Hose clamps

(4) #28 Hose clamps

(1) Mounting bracket

(1) Back plate brackets

(2) 18mm-1.50 Bung plugs

(2) 12mmx1.25 Bung plugs

(2) 1/2"-13 x 1-3/4" Socket head cap bolts

(1) 3/8"-16 x 3-1/4" Socket head cap bolt

(1) 3"-16 x 2" Socket head cap bolt

(4) 5/15"-18 x 5/8" Serrated flange head bolts

(2) Split lock washers

(2) 3/8" Flat washers

(2) 0.75" x 0.122 x 0.75" Aluminum spacers

(2) 0.625" x 0.123" x 0.75" Aluminum spacers

(1) Zip tie

Instructions 

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.