Feuling 9006 oil pump pressure test tool m8 17-24
FEULING oil pump pressure test tool for Feuling M8 oil pumps, ONLY fits FEULING oil pumps, does not fit factory HD oil pumps.
Bench test the FEULING Milwaukee Eight oil pumps, cycle the pressure relief valve, testing operation and assuring the valve moves freely, seats and seals each time, any leakage at the relief valve will reduce oil pressure.
FEULING oil pump pressure test tool for Feuling M8 oil pumps, ONLY fits FEULING oil pumps, does not fit factory HD oil pumps.
This tool allows the engine builder to know what PSI the relief valve opens; the spring tension can be adjusted to achieve the desired pop off PSI. Tool includes: air regulator, 0 - 100 psi pressure gauge, plugs for water and oil cooled oil pumps, gasket & needed hardware. Feuling recommends the oil pump relief valve be seated and sealed from 0-30 psi with full pop off at 50-60 psi. Made in the U.S.A.
Proper relief valve seal will insure good hot idle oil psi and reduce oiling system cavitation and related pressure issues.
Fits Feuling oil and water cooled oil pumps 7018, 7019, 7020, 7021
Does not fit Factory HD oil pumps
FITS:
M8 17-22 FEULING oil pump ONLY, fits Feuling oil and water cooled oil pumps 7018, 7019, 7020, 7021
