Feuling 7088 Hydraulic Cam Chain Tensione & 1001 525 Reaper Chain Driven Cam set
FEULING 7088B Hydraulic Cam Chain Tensioner Conversion Kit Twin Cam 01-06 &
Feuling 1001 525 Reaper Chain Driven Cam set TC 99-06
- These cams produce more power and torque which increases the cranking compression and improves throttle response, acceleration and fuel mileage
- Dyno proven and track tested
- Feuling camshaft installation kits recommended
- Made in the U.S.A.
525 Cams
- Increases torque band width and fuel economy and are a great bolt-in camshaft upgrade for stock engine
- Produces strong low- and mid-range power with linear horsepower and torque curve
- Can be used with factory valve springs, pushrods and lifters
- Power range from 2,000-5,900 rpm
Intake Specs:
Open: 4 degrees
Close: 42 in.
Duration at .053 in.: 226 degrees
Valve lift: .525 in.
Lobe Centerline: 109 degree
Exhaust Specs:
Open: 51 degrees
Close: 5 degrees
Duration at .053 in.: 236 degrees
Valve Lift: .535 in.
Lobe Centerline: 113 degree
|
Fits: 01-06 Twin Cam Delphi equipped ignition system engines w/o cam sensor.
NOTE: Rocker box gasket kit included so the factory one-piece pushrods can be reused. NOTE: Requires separate purchase of conversion camshafts PART NOs. 146097, 145351, 145352, 145353 or 146078 Included Items: (1) Chrome aluminum camplate (19) O-Rings (assorted sizes) (2) Rocker cover gaskets (2) Breather assembly gaskets (2) Breather assembly cover gaskets (2) Breather assembly baffle gasket (2) Tappet cover gaskets (1) Cam gear cover gasket (2) Umbrella valve seals (2) Filter element (2) Exhaust gaskets (2) 22 x 29 x 3 Needle bearing (1) 17 tooth Outer crank sprocket (1) 34 tooth Outer cam sprocket (1) Oil pump assembly (1) 16 Link inner roller chain (1) 22 link outer roller chain (6) Camshaft sprocket thrush washers (2) Cam chain tensioner (1) 3/8"-24 x 1-3/4" Flange 12 point external wrenching (1) 5/16"-18 x 3/4" Flange 12 point external wrenching (2) Spacers (1) Snap ring (1) 1/4"-20 x 1/2" Button head bolt (2) 1/4"-20 x 1-1/4" Flange 12 point external wrenching (2) 1/4"-20 x 3/4" Flange 12 point external wrenching (1) 0.02 fl oz. Loctite 242 (1) .5 oz. Fastener assembly lubricant Instructions |
| Mfg #: | 7088 |
|---|---|
| Part #: | 1400530 |
| Type | Cam Chain Tensioner |
| Units | Kit |
| Weight | 5.45 lbs |