Andrews 288126 TW26A Grind Cam twin cam

• Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed.

• Bolt-in cams for low rpm torque and two-up touring
• Add more torque and horsepower at low and middle rpm range (1800-5500 rpm)
• Works well with either fuel-injection or carburetor
• Can be used with stock valve springs and tappets

NOTE: 00-02 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used.

NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance.

• Opens: 11 degree
• Closes: 35 degree
• Duration @ .053: 226 degree
• Duration @ .020: 262 degree
• Valve Lift: .490
• Lift TDC: .138

• Opens: 41 degree
• Closes: 09 degree
• Duration @ .053: 230 degree
• Duration @ .020: 266 degree
• Valve Lift: .490
• Lift TDC: .120

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.