null

J&M JMA6-400HR16-UL Rokker 400 watt 4 Ch Stage 6 Amplifier 16-23 Road glide

MSRP: $749.00
Was: $749.00
Now: $623.24
(You save $125.76 )
(No reviews yet) Write a Review
J&M JMA6-400HR16-UL Rokker 400 watt 4 Ch Stage 6 Amplifier 16-23 Road glide FLTRU FLTRK JMC

J&M JMC JMA6-400HR16-UL Rokker 400 watt 4 Ch Stage 6 Amplifier 16-23 Road glide FLTRU FLTRK

JMC ROKKER STAGE6 400W 4-CH AMP KIT 2016-2023 HARLEY ROADGLIDE ULTRA/LTD

 
Part Number:JMA6-400HR16-UL
 
  • Amplifier Output Power:400w RMS total (100w x 4) into 2-ohms at 14.4vdc
  • Amplifier Class:Class D properly shielded against FM interference
  • Manually Adjustable:Easily adjustable during installation with small screwdriver
  • External Dimensions:7 ¼ x 4 ¾ x 1 ¾
  • Mounting Options:Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing
  • Speaker Compatibility:Compatible with any 2- or 4-ohm speakers with sufficient power rating
  • Radio Compatibility:Amplifier is tuned for connection to the Harley GTS, 6.5GT, or 4.3 Std radio with Stock Harley Flash and is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14
  • Comparision Rating:ROKKER amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate
The new ROKKER 4-channel 400w amplifier kit has been designed specifically for use in the 2016-2023 Harley® RoadGlide Ultra/Ltd fairing with the stock Harley 4.3 Std, 6.5GT or GTS touch-screen radio, and is tuned for the stock Harley flash, NO SPECIAL FLASH needed.
 
This new amplifier kit is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14
 
This is a full range class D amplifier and is spec’d at 100watts RMS per channel X4 channels, (400w total) driven continuous into a 2- or 4-ohm speaker load @ 14.4vdc, and is compatible with any 2- or 4-ohm speakers with sufficient power rating.
 
Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing.
 
Custom made plug-n-play JMC red-band wiring harnesses are included with this complete amplifier kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.
 
Amplifier itself measures 7 ¼” x 4 ¾“ x 1 ¾”.
 
Harley Radio Programming Note: If your Harley infotainment radio was previously flashed to a different configuration from stock, (i.e., BoomI or Boom II) instruct your dealer to re-flash the radio back to “” 4-Speakers, Upper-Fairing, Rear-Pods, No-Amp “” using the Harley or other brand digital technician.