FEULING® camshaft kits for Milwaukee Eight engines include camshaft, lifters and a cam installation kit that includes cam bearing, cam/crank hardware and a gasket/O-ring kit that allows for installation of the factory one piece pushrods and or optional and recommended heavy duty HP+® 0.165" wall one piece pushrods - see Part No. 14-01311

Feuling fastener kit Part No. 27-5638 is also highly recommended to help prevent cylinder head cracking, this kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress on the rocker shaft standoffs.

RACE SERIES® kits come with RACE SERIES® lifters

465 CAM - The 465 Reaper is an accelerator, producing solid bottom end performance with substantial gains above 2,800 RPM when compared to stock. This direct bolt in replacement for Milwaukee Eight engines can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or performance exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train, see Part No. 189642. This cam will also respond well with increased bore and or compression.  Easy starting with unique idle sound.  Better throttle response.

Made in U.S.A.

RPM range: 1,850 - 5,950, Grind: 465, Overlap:  10

CAM SPECS ARE MEASURED ON THE LIFTER @.0.050" LIFT WITH 1.61 ROCKER ARM RATIO

Intake: .445" Valve Lift, 4° Open, 23° Close, 207° Duration @.050", .100" lift @ TDC, 99.5° Lobe Centerline 
Exhaust : .465" Valve Lift, 50° Open, 6° Close, 236° Duration @ .050", .100" lift @ TDC, 112° Lobe Centerline