BMR's suspension designed the SB042 sway bar for street performance, drag race, autocross, and road race applications. The large adjustable sway bar has four positions, giving you the versatility to drive to and from the track and still out handle the competition with the same sway bar. The SB042 gives you a 16%-270% increase in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to fine-tune the handling characteristics of the suspensions you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. If your a drag racer, but don't want a solid-mounted antiroll bar on the street, the SB042 is stiff enough to keep the body flat for hard launches and soft enough to maintain streetability. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB042 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!2005-2010 GT 20mm Solid 133% 169% 214% 270%2011+ V6 22mm Solid 52% 76% 105% 142%2011+ GT500 24mm Solid 16% 34% 56% 84%BOSS 302 25mm Solid -10% 3% 20% 42%BOSS 302 Leguna Seca 26mm Solid -17% -4% 11% 30%.
Construction: Sway Bar Kit With Bushings, Rear, Adjustable, Hollow 25mm
Fitment
BMR 11-14 S197 Mustang Rear Hollow 25mm Adj. Sway Bar Kit w/ Bushings - Red
Manufacturer part number: SB042R
Turn 14 part number: bmrSB042R
