Increase flow area up to 103% over the stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it's diameter down to a tiny 2-1/4". Banks boost tubes are 3-1/2" constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower. Banks hot and cold side tubes have up to 103% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots. Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster. Key Features: 3-1/2" constant diameter mandrel bent with larger radius bends. Combine with Banks Monster Ram Gen 2 for maximum power. More air allows for more fuel which means more horsepower. Over 73% larger flow area vs stock (3.5in vs 2.75in) (103% larger if you count the OEM dent). 4- and 5-ply heavy-duty silicone couplers. Spring-loaded constant tension clamps. Greater cooling capacity. Perfect fit and finish. Lower EGTs
Construction: Boost Tube Upgrade Kit
Features
- Up to 103% greater flow area vs stock. Spools turbo faster with lower EGTs
- Tube Has 2.375 in. Reduction
Fitment
Banks Power 13-18 Ram 6.7L Diesel Boost Tube System - Raw Tubes
Manufacturer part number: 25995
Turn 14 part number: gbe25995
