S&S 330-0665 100" Power Package for HD Twin Cam 88 Models with 585 Easy Start gear drive Cams Wrinkle Black

The 100" Power Package is the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from 88ci to 100ci as well as adding matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power.

• Made in the USA
• S&S 4.000" Big-Bore Cylinders, Piston Kits, S&S 585 Easy Start® Cams, S&S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit
• S&S Cylinder
• 2x S&S 4.000" bore cylinders
• Low friction ductile cast iron liner
• Bolt in
• No maching, balancing, or splitting the crankcase
• Can be used with stock heads
• Increase displacement from 88 ci to 100 ci
• Piston Kit
• 2x 4.000" pistons for front and rear
• 2x 0.927" piston pins
• 4x Piston pin clips with installation tool
• 2x Ring packs which includes the top, second, oil rail and expander rings
• Provides 10.5:1 compression ratio
• S&S 585 Easy Start® Cam Specifications
• Intake: Open 20° / Close 45° / Duration at 0.053" 245° / Valve Lift 0.585"
• Exhaust: Open 60° / Close 20° / Duration at 0.053" 260° / Valve Lift 0.585"
• S&S Quickee Pushrods
• Adjustable with chrome tubes
• TC3 Cam Support Plate and TC3 Oil Pump
• Machined from aluminum forgings
• Ensures consistent oil pressure and engine longevity
• Precision Hydraulic Tappets
• Close tolerances for low leak down rates
• Reduced valve train noise from start to shut down
• Notes
• Not for '06 Dyna.
• Not compatible with S&S 79 cc Super Stock® heads.
• Not recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.
• '99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).

Specifications

• 4" Bore bolt on cylinder and piston kit
• 10.5:1 Compression
• Wrinkle Black Finish
• S&S 585 Easy Start Chain Drive Cams
• TC3 Oil Pump
• TC3 Cam Plate
• S&S cam chain tensioners
• Quickee Adjustable Pushrods with Tubes
• S&S Precision Tappets

Features & Benefits

• Low friction Ductile Cast Iron liner
• 10.5:1 Compression
• Bolts in. No machining, balancing, or splitting the crankcases
• Upgrade TC88 to 100 cu inches
• Cylinders fit to pistons- No machining required
• All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
• Engineered package to deliver the best bolt in performance
• Although not mandatory, we recommend adding an oil cooler to bikes ridden in warmer climates