• Power Duals is the ticket to style, quality and performance
• More than just individual head pipes, Power Duals integrates an exclusive Vance & Hines Power Chamber™ hidden behind a contoured heat shield that generates more horsepower and torque than stock
• Allows the use of OEM style mufflers 
• Systems include 220° full-coverage header pipe heat shields
• This new right side design eliminates the heat issues on the left side for the passenger, routing hot exhaust gases below the footpeg and protecting vital engine components and side covers from heat damage
• Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals
• Adapter kit, Part No. 4409834 required to extend the 2017+ Power Duals head pipes to allow installation on 95-16 H-D Dresser and Trike models 4" diameter or smaller mufflers including OEM mufflers
• All CVO models require floorboard extension kit PART #4901122 (sold separately)
• Made in the U.S.A.

NOTE: C.A.R.B. E.O. #K-006-1 -  for needed mufflers for C.A.R.B. E.O. set.

NOTE: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available

NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEM/LUBES category for products that will help prevent or remove blueing.

(1) Chrome steel front header assembly

(1) Chrome steel front heat shield

(1) Chrome steel rear heat shield

(1) Chrome steel connector heat shield

(1) Chrome steel right muffler heat shield

(1) Chrome steel right side crossover heat shield

(1) Chrome steel rear crossover heat shield

(1) Chrome steel left side crossover heat shield

(2) 9" Black cable ties

(1) Torca band clamp

(1) #36 Hose clamp

(2) #28 Hose clamps

(10) #20 Hose clamps

(1) Crossover tube clamp

(1) 3/8"-16 x 3-1/2" Socket cap head bolt

(1) 3/8"-16 x 2-1/4" Socket cap head bolt

(1) 5/16"-18 x 2-1/4" Socket cap head bolt

(1) Black steel crossover bracket

(1) 3/8"-16 Lock nut

(2) Rubber grommets

(1) 3/8"-16 Carriage bolt

(2) 1/4"-20 Shoulder bolts

(1) Black steel rear floor board spacer

(1) Black steel front floor board spacer

(1) Black steel bracket spacer

(2) 3/8" Split lock washers

(3) 5/16" Flat washers

(1) 3/8" Flat washer

(1) 5/16" Split lock washer

(2) 1/-12mm O2 adaptor

Instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.