Akrapovic Exhaust Header Ducati Multistrada 1200 / S 2015-2020
E-D12E4 ONLY WORKS WITH
Akrapovic Exhaust Header Ducati Multistrada 1200 / S
Akrapovic Header Pipes are a great addition to your Akrapovic Slip-On Exhaust. Contributing to even greater exhaust flow and back pressure while increasing horse and torque. A special process known as hydroforming is used in the manufacturing of the exhaust tubes. This process injects pressurized water into each tube to form the ideal shape for optimum exhaust flow without causing creases or compromising the strength of the steel.
It’s not just about peak power - Akrapovic exhaust systems deliver increased performance throughout the entire RPM range. Increases in power and torque result in a much smoother power delivery and ride. All Akrapovic exhaust system measurements are formulated on in-house computer-controlled flow benches.
- No fuel remapping required, but for optimal performance RevZilla recommends use of a fuel controller
- A combination of beautiful machine and hand welds
- Air-tight quality controlled production means your exhaust will be perfect
- High-quality, silicon-shielded stainless steel exhaust springs
|Unit||Stock Exhaust||Akrapovic||Max Gain|
|Maximum Power||kW||101.6 at 9750 rpm||104.5 at 9900 rpm||+ 3.6 at 9950 rpm|
|HP (m)||138.1 at 9750 rpm||142.1 at 9900 rpm||+ 4.9 at 9950 rpm|
|HP (i)||136.2 at 9750 rpm||140.2 at 9900 rpm||+ 4.8 at 9950 rpm|
|Maximum Torque||Nm||114.3 at 8100 rpm||116.1 at 8000 rpm||+ 6.6 at 5450 rpm|
|lb-ft||84.3 at 8100 rpm||85.6 at 8000 rpm||+ 4.9 at 5450 rpm|
Note: Only compatible with trapezoidal Akrapovic Slip-On Exhaust.